Configuring NFS in SmartOS
NFS (network file system) provides access to remote filesystems which appear similar to local resources on client hosts.
The following focuses on NFS server and client configurations in SmartOS. Our host details are:
HOST (server): cn112 (172.25.0.49)
HOST (CN (compute node): cn110 (----)
HOST (SmartMachine VM): vm100 (172.25.0.100)
PROMPT: HOST [0]
OS: SmartOS 20130321T213641Z
SmartMachine IMAGE: smartos-base64-1.9.1
NOTE: The following should apply
equally well to previous
versions of SmartOS.
Before explaining any logic or reasoning, below is only command we really need for our SmartOS NFS server node (cn112) and the two commands for our SmartMachine client VM (vm100):
cn112 [0] /usr/sbin/zfs create -p -o quota=1.5g -o
> sharenfs='rw=@172.25.0.0/24:@172.25.1.0/25,ro=@172.25.1.128/25,root=172.25.0.100'
> zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff vm100 [0] /usr/sbin/mount -Fnfs -o rw,intr
> 172.25.0.49:/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff /mnt/n
fs-pool vm100 [0] /opt/local/bin/grep nfs-pool /etc/vfstab 172.25.0.49:/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff - /mnt/n fs-pool nfs - yes -
In the following setup, I include necessary network configuration details since neither the server nor the client are currently configured for our internal NFS segment. Without further ado, on our NFS server we have no VMs, either SmartMachines or KVM instances, since we are not using this host as a traditional CN. Also, we have 2 network interfaces, though only one (the admin NIC) is currently plumbed and addressed:
cn112 [0] /usr/sbin/vmadm list
UUID TYPE RAM STATE ALIAS
cn112 [0] /usr/sbin/ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1100943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,ROUTER,IPv4> mtu 1500 index 2
inet 192.168.56.112 netmask ffffff00 broadcast 192.168.56.255
ether 8:0:27:24:cf:6a
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
cn112 [0] /usr/sbin/dladm show-phys -m
LINK SLOT ADDRESS INUSE CLIENT
e1000g0 primary 8:0:27:24:cf:6a yes e1000g0
e1000g1 primary 8:0:27:77:c1:cc yes e1000g1
cn112 [0] /usr/bin/sysinfo | /usr/bin/json "Network Interfaces"
{
"e1000g0": {
"MAC Address": "08:00:27:24:cf:6a",
"ip4addr": "192.168.56.112",
"Link Status": "up",
"NIC Names": [
"admin"
]
},
"e1000g1": {
"MAC Address": "08:00:27:77:c1:cc",
"ip4addr": "",
"Link Status": "up",
"NIC Names": [
"nfs"
]
}
}
cn112 [0]
Our second NIC, "e1000g1" is on the same LAN segment presented to VMs by our other CNs. Below, I've configured the interface and updated our configuration for retention through reboot:
cn112 [0] /usr/bin/ifconfig e1000g1 plumb 172.25.0.49 netmask 255.255.255.0 broadcast + up
cn112 [0] /usr/bin/grep nfs /usbkey/config
nfs_nic=8:0:27:77:c1:cc
nfs0_ip=172.25.0.49
nfs0_netmask=255.255.255.0
nfs0_network=...
nfs0_gateway=172.25.0.49
cn112 [0]
Over on our CN (cn110), we can see that we have 3 VMs configured, 2 of which are currently running. (The one we care about is "vm100".) We can also see that only one interface is plumbed in the global zone (GZ), that we have 3 NICs (admin, world, and vmint), and only the "world" NIC (e1000g1) is currently in use by VMs:
cn110 [0] /usr/sbin/vmadm list
UUID TYPE RAM STATE ALIAS
56800183-ab62-4db4-9d39-1fdc9a7e607a OS 256 stopped vm102
c9fd4db6-5da0-4b0d-8c7a-87c55b10caff OS 256 running vm100
e669fd30-7c81-463d-99bc-7989f9e8af78 OS 256 running vm101
cn110 [0] ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1100943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,ROUTER,IPv4> mtu 1500 index 2
inet 192.168.56.110 netmask ffffff00 broadcast 192.168.56.255
ether 8:0:27:20:64:b9
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
cn110 [0] /usr/sbin/dladm show-phys -m
LINK SLOT ADDRESS INUSE CLIENT
e1000g0 primary 8:0:27:20:64:b9 yes e1000g0
e1000g1 primary 8:0:27:67:1e:93 yes e1000g1
e1000g2 primary 8:0:27:16:b9:c4 no --
cn110 [0] /usr/sbin/dladm show-vnic
LINK OVER SPEED MACADDRESS MACADDRTYPE VID ZONE
net0 e1000g1 0 72:53:2c:7d:77:17 fixed 0 e669fd30-7c81-463d-99bc-7989f9e8af78
net0 e1000g1 0 e2:c9:ae:f6:82:1a fixed 0 c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
cn110 [0] /usr/sbin/sysinfo | /usr/bin/json "Network Interfaces"
{
"e1000g0": {
"MAC Address": "08:00:27:20:64:b9",
"ip4addr": "192.168.56.110",
"Link Status": "up",
"NIC Names": [
"admin"
]
},
"e1000g1": {
"MAC Address": "08:00:27:67:1e:93",
"ip4addr": "",
"Link Status": "up",
"NIC Names": [
"world"
]
},
"e1000g2": {
"MAC Address": "08:00:27:16:b9:c4",
"ip4addr": "",
"Link Status": "unknown",
"NIC Names": [
"vmint"
]
}
}
cn110 [0]
NIC e1000g2 (tagged as "vmint") on "cn110" resides on the same LAN segment as e1000g1 (nfs) on "cn112". Also, verifying the above regarding "vm100", we can see only one configured virtual NIC (vNIC), which is attached to our "world" interface:
cn110 [0] /usr/sbin/vmadm get c9fd4db6-5da0-4b0d-8c7a-87c55b10caff | /usr/bin/json nics
[
{
"interface": "net0",
"mac": "e2:c9:ae:f6:82:1a",
"nic_tag": "world",
"gateway": "10.0.22.254",
"primary": true,
"ip": "10.0.22.100",
"netmask": "255.255.255.0"
}
]
cn110 [0]
In order to use the NFS services to be shared out from "cn112", we'll need to add a new vNIC to "vm100". Below, we add the new vNIC to "vm100", and verify it was configured:
cn110 [0] /usr/bin/cat /var/tmp/vm100.addnic
{
"add_nics": [
{
"physical": "net1",
"index": 1,
"nic_tag": "vmint",
"ip": "172.25.0.100",
"netmask": 255.255.255.0"
}
]
}
cn110 [0] /usr/sbin/vmadm update c9fd4db6-5da0-4b0d-8c7a-87c55b10caff < /var/tmp/vm100.addnic
Successfully updated c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
cn110 [0] /usr/sbin/vmadm get c9fd4db6-5da0-4b0d-8c7a-87c55b10caff | /usr/bin/json nics
[
{
"interface": "net0",
"mac": "e2:c9:ae:f6:82:1a",
"nic_tag": "world",
"gateway": "10.0.22.254",
"primary": true,
"ip": "10.0.22.100",
"netmask": "255.255.255.0"
},
{
"interface": "net1",
"mac": "c2:9c:ab:c3:de:4d",
"nic_tag": "vmint",
"ip": "172.25.0.100",
"netmask": "255.255.255.0"
}
]
cn110 [0]
As seen below, while the configuration for "vm100's" vNIC is in place, the vNIC is not yet created or usable until after the "vm100" SmartMachine is rebooted:
cn110 [0] /usr/sbin/dladm show-vnic
LINK OVER SPEED MACADDRESS MACADDRTYPE VID ZONE
net0 e1000g1 0 72:53:2c:7d:77:17 fixed 0 e669fd30-7c81-463d-99bc-7989f9e8af78
net0 e1000g1 0 e2:c9:ae:f6:82:1a fixed 0 c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
cn110 [0] /usr/sbin/vmadm reboot c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
Successfully completed reboot for c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
cn110 [0] /usr/sbin/vmadm list -v
UUID TYPE RAM STATE ALIAS
56800183-ab62-4db4-9d39-1fdc9a7e607a OS 256 stopped vm102
c9fd4db6-5da0-4b0d-8c7a-87c55b10caff OS 256 running vm100
e669fd30-7c81-463d-99bc-7989f9e8af78 OS 256 running vm101
cn110 [0] /usr/sbin/vmadm get c9fd4db6-5da0-4b0d-8c7a-87c55b10caff | /usr/bin/json nics
[
{
"interface": "net0",
"mac": "e2:c9:ae:f6:82:1a",
"nic_tag": "world",
"gateway": "10.0.22.254",
"primary": true,
"ip": "10.0.22.100",
"netmask": "255.255.255.0"
},
{
"interface": "net1",
"mac": "c2:9c:ab:c3:de:4d",
"nic_tag": "vmint",
"ip": "172.25.0.100",
"netmask": "255.255.255.0"
}
]
cn110 [0] /usr/sbin/dladm show-vnic
LINK OVER SPEED MACADDRESS MACADDRTYPE VID ZONE
net0 e1000g1 0 72:53:2c:7d:77:17 fixed 0 e669fd30-7c81-463d-99bc-7989f9e8af78
net0 e1000g1 0 e2:c9:ae:f6:82:1a fixed 0 c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
net1 e1000g2 0 c2:9c:ab:c3:de:4d fixed 0 c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
cn110 [0]
Back on our NFS server (cn112), we check our zpool "zones" to determine how much space we have before setting up an NFS share:
cn112 [0] /usr/sbin/zfs list -r zones
NAME USED AVAIL REFER MOUNTPOINT
zones 4.32G 11.3G 654K /zones
zones/cf7e2f40-9276-11e2-af9a-0bad2233fb0b 323M 11.3G 323M /zones/cf7e2f40-9276-11e2-af9a-0bad2233fb0b
zones/config 38K 11.3G 38K legacy
zones/cores 31K 10.0G 31K /zones/global/cores
zones/dump 838M 11.3G 838M -
zones/opt 957K 11.3G 957K legacy
zones/swap 3.11G 14.4G 16K -
zones/usbkey 127K 11.3G 127K legacy
zones/var 73.3M 11.3G 73.3M legacy
cn112 [0] /usr/sbin/imgadm list
UUID NAME VERSION OS PUBLISHED
cf7e2f40-9276-11e2-af9a-0bad2233fb0b base64 1.9.1 smartos 2013-03-22T17:11:29Z
cn112 [0]
(Of note above, we see ZFS dataset "zones/cf7e2f40-9276-11e2-af9a-0bad2233fb0b" already exists and is related to image "smartos-base64-1.9.1". Given the function of this node, that dataset is currently irrelevant.) We now get to set up our first NFS share. By default, SmartOS gives us a "zones" zpool consisting of all disk space and within this zpool, I've created our NFS share dataset:
cn112 [0] /usr/sbin/zfs create -p -o quota=1.5g -o
> sharenfs='rw=@172.25.0.0/24:@172.25.1.0/25,ro=@172.25.1.128/25,root=172.25.0.100'
> zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
cn112 [0] /usr/sbin/zfs get sharenfs zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
NAME PROPERTY VALUE SOURCE
zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff sharenfs rw=@172.25.0.0/24:@172.25.1.0/25,ro=@172.25.1.128/25,root=172.25.0.100 local
cn112 [0]
The shared dataset, zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff,
is so named as its intended usage is by "vm100" on "cn110", thus
the end portion is "vm100's" UUID. (You can name your's however
you'd like.) Since "/etc" on "cn112" is transient in nature, we
didn't bother with files under "/etc/dfs" like we could otherwise
do under Solaris. With this being SmartOS, we instead can use ZFS'
native NFS handling via "sharenfs", which adheres to the same
nomenclature and conventions as the traditional "share_nfs" command.
Our SmartMachine, vm100, will have full root access to the share
given the options set above. Also, we've set a quota to restrict
the share to no more than 1.5 GB in size. After executing the above
'zfs create' command, our NFS share is immediately available as
seen below:
cn112 [0] /usr/sbin/share
-@zones/nfs/c9 /zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
> sec=sys,rw=@172.25.0.0/24:@172.25.1.0/25,ro=@172.25.1.128/25,root=172.25.0.100 ""
cn112 [0] /usr/sbin/zpool history zones | /usr/bin/grep create | tail -1
2013-05-06.01:17:56 zfs create -p -o quota=1.5g -o
> sharenfs=rw=@172.25.0.0/24:@172.25.1.0/25,ro=@172.25.1.128/25,root=172.25.0.100
> zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
cn112 [0] /usr/bin/head -3 /var/svc/log/network-nfs-server:default.log
[ May 6 01:17:51 Enabled. ]
[ May 6 01:17:52 Executing start method ("/lib/svc/method/nfs-server start"). ]
[ May 6 01:17:52 Method "start" exited with status 0. ]
cn112 [0]
Notably, we can see in our SMF log for our NFS server service that method "nfs-server" started just seconds before the 'zfs create' command was executed. This wasn't due to any errant command that I didn't show; it was handled for us due to the "sharenfs" option we passed to 'zfs create'.
Back on our CN (cn110), I've logged into "vm100", created a mountpoint for our new share to be mounted to, and mounted the share to the system:
cn110 [0] /usr/sbin/zlogin -l root c9fd4db6-5da0-4b0d-8c7a-87c55b10c aff
[Connected to zone 'c9fd4db6-5da0-4b0d-8c7a-87c55b10caff' pts/4]
Last login: Mon May 6 00:39:27 on pts/3
__ . .
_| |_ | .-. . . .-. :--. |-
|_ _| ;| || |(.-' | | |
|__| `--' `-' `;-| `-' ' ' `-'
/ ; SmartMachine (base64 1.9.1)
`-' http://wiki.joyent.com/jpc2/SmartMachine+Base
vm100 [0] /opt/local/bin/mkdir /mnt/nfs-pool
vm100 [0] /usr/sbin/mount -Fnfs -o rw,intr \
> 172.25.0.49:/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff /mnt/nfs-pool
vm100 [0] /opt/local/bin/df -h /mnt/nfs-pool
Filesystem Size Used Avail Use% Mounted on
172.25.0.49:/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff 1.5G 31K 1.5G 1% /mnt/nfs-pool
vm100 [0] /opt/local/bin/whoami
root
vm100 [0] /opt/local/bin/touch /mnt/nfs-pool/myfile
vm100 [0] /usr/bin/truss -vlstat -tlstat ls -l /mnt/nfs-pool/myfile
lstat("/mnt/nfs-pool/myfile", 0x0045F020) = 0
d=0x0000022200000003 i=8 m=0100644 l=1 u=0 g=0 sz=0
at = May 6 01:57:52 UTC 2013 [ 1367805472.207230095 ]
mt = May 6 01:57:52 UTC 2013 [ 1367805472.207230266 ]
ct = May 6 01:57:52 UTC 2013 [ 1367805472.207246365 ]
bsz=8192 blks=1 fs=nfs
-rw-r--r-- 1 root root 0 May 6 01:57 /mnt/nfs-pool/myfile
vm100 [0]
cn112 [0] /usr/bin/truss -vlstat -tlstat ls -l /zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
lstat64("/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff/myfile", 0x08047660) = 0
d=0x0169000A i=8 m=0100644 l=1 u=0 g=0 sz=0
at = May 6 01:57:52 UTC 2013 [ 1367805472.207230095 ]
mt = May 6 01:57:52 UTC 2013 [ 1367805472.207230266 ]
ct = May 6 01:57:52 UTC 2013 [ 1367805472.207246365 ]
bsz=131072 blks=1 fs=zfs
-rw-r--r-- 1 root root 0 May 6 01:57 /zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff/myfile
cn112 [0]
A quick test above via 'touch' also details that we can create files on the new share from our VM as root. To further validate, I've also checked the same file from the server side. Now, on to test our configuration retention on the server side. Below, I've unmounted the share from "vm100" and rebooted our NFS server. Post reboot, I've checked our configured NICs and verified that our NFS share is again presented for client access via 'share':
vm100 [0] /usr/sbin/umount /mnt/nfs-pool
vm100 [0]
cn112 [0] /usr/sbin/init 6
troy@glados [0] ssh -l root cn112
Password:
Last login: Mon May 6 00:13:28 2013 from 192.168.56.1
- SmartOS Live Image v0.147+ build: 20130321T213641Z
cn112 [0] /usr/sbin/ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1100943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,ROUTER,IPv4> mtu 1500 index 2
inet 192.168.56.112 netmask ffffff00 broadcast 192.168.56.255
ether 8:0:27:24:cf:6a
nfs0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu1500 index 3
inet 172.25.0.49 netmask ffffff00 broadcast 172.25.0.255
ether 2:8:20:a6:87:71
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
cn112 [0] /usr/sbin/dladm show-phys -m
LINK SLOT ADDRESS INUSE CLIENT
e1000g0 primary 8:0:27:24:cf:6a yes e1000g0
e1000g1 primary 8:0:27:77:c1:cc yes e1000g1
cn112 [0] /usr/sbin/dladm show-link nfs0
LINK CLASS MTU STATE BRIDGE OVER
nfs0 vnic 1500 up -- e1000g1
cn112 [0] /usr/sbin/dladm show-vnic
LINK OVER SPEED MACADDRESS MACADDRTYPE VID ZONE
nfs0 e1000g1 1000 2:8:20:a6:87:71 random 0 --
cn112 [0] /usr/sbin/sysinfo | /usr/bin/json "Network Interfaces"
{
"e1000g0": {
"MAC Address": "08:00:27:24:cf:6a",
"ip4addr": "192.168.56.112",
"Link Status": "up",
"NIC Names": [
"admin"
]
},
"e1000g1": {
"MAC Address": "08:00:27:77:c1:cc",
"ip4addr": "",
"Link Status": "up",
"NIC Names": [
"nfs"
]
}
}
cn112 [0] /usr/sbin/share-@zones/nfs/c9 /zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff \
> sec=sys,rw=@172.25.0.0/24:@172.25.1.0/25,ro=@172.25.1.128/25,root=172.25.0.100 ""
cn112 [0]
As seen below, we can immediately again mount up the NFS share and\ see no data has been lost:
vm100 [0] /usr/sbin/mount -Fnfs -o rw,intr \
> 172.25.0.49:/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff /mnt/nfs-pool
vm100 [0] /opt/local/bin/df -h /mnt/nfs-pool
Filesystem Size Used Avail Use% Mounted on
172.25.0.49:/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff 1.5G 31K 1.5G 1% /mnt/nfs-pool
vm100 [0] /opt/local/bin/ls /mnt/nfs-pool
myfile
vm100 [0]
Now let's retain the share mount point by updating "/etc/vfstab"\ on "vm100". To test configuration retention here, also below, I've\ logged out, rebooted the SmartMachine via 'vmadm' and logged back\ in:
vm100 [0] /opt/local/bin/grep nfs-pool /etc/vfstab
172.25.0.49:/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff - /mnt/nfs-pool nfs - yes rw,intr
vm100 [0] exit
[Connection to zone 'c9fd4db6-5da0-4b0d-8c7a-87c55b10caff' pts/4 closed]
cn110 [0] /usr/sbin/vmadm reboot c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
Successfully completed reboot for c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
cn110 [0] /usr/sbin/zlogin -l root c9fd4db6-5da0-4b0d-8c7a-87c55b10caff
[Connected to zone 'c9fd4db6-5da0-4b0d-8c7a-87c55b10caff' pts/4]
Last login: Mon May 6 01:31:09 on pts/5
__ . .
_| |_ | .-. . . .-. :--. |-
|_ _| ;| || |(.-' | | |
|__| `--' `-' `;-| `-' ' ' `-'
/ ; SmartMachine (base64 1.9.1)
`-' http://wiki.joyent.com/jpc2/SmartMachine+Base
vm100 [0] /opt/local/bin/df -h /mnt/nfs-pool
Filesystem Size Used Avail Use% Mounted on
172.25.0.49:/zones/nfs/c9fd4db6-5da0-4b0d-8c7a-87c55b10caff 1.5G 31K 1.5G 1% /mnt/nfs-pool
vm100 [0]
For our verification, I've simply ran 'df' against our share mount\ point. At this point, our work is now complete.