View Source

For best results (enterprise grade hardware) see [https://github.com/joyent/manufacturing]


While people have had success with these configurations, you might have different results. {note}This is not intended as an exhaustive list - other combinations may work. Your mileage may vary.{note}
{toc}
<Please add your own>

h3. magnayn

* Supermicro X9DRH-7F
* 6x 2Gb disks, working off the on-board LSI 2208 controller w/ the new mr_sas driver.
** Setting up the disks for JBOD was not well documented. You need to use the Pre-boot CLI, and the commands PDEnableJBOD, PDMakeGood and PDMakeJBOD on each drive. You do not need to re-flash your card.

h3. calmh

* Supermicro X8SIL
* Intel Xeon X3440
* LSI SAS9200-8e HBA, WD WD1003FBYX and Intel SSDSA2CT040G3 disks
* Booted via USB

* Supermicro X9SCL/X9SCM
* Intel Xeon E3-1230
* Seagate&nbsp;ST2000DM001 disks on on-board SATA, correctly detected as needing ashift=12
* Booted via USB

h3. viridari

* HP Proliant N40L "Microserver" (Model #658553-001)
** Booted via USB
** Zones Only,&nbsp;*no KVM support*&nbsp;on AMD as of Apr. 2012

h3. robinbowes

* Intel(R) Xeon(R) CPU E31230 ( i3 )
* Supermicro&nbsp;X9SCL/X9SCM
* Booted via USB

h3. konobi

* Intel Core i3
* ASUS P8Z68-V LX Z68 LGA1155 ATX
* Booted via USB

h3. konobi (mobile development server)

* Intel NUC&nbsp;DC3217IYE
* Core i3-3217U
* Crucial 16GB RAM
* Intel gigabit NIC
* Crucial M4 128GB mSATA SSD
* Booted via USB

h3. MerlinDMC (local playground)

* Intel Core i3
* Gigabyte H67N-USB3-B3 LGA1155 mATX
* LSI SAS 9211-8i HBA
* Booted via USB

h3. MerlinDMC (remote playground)

* Intel Core i7
* ASUS P8H67-M PRO LGA1155 ATX
* Booted via USB

h3. bartlamboo

* Intel Core i3 2120T
* Intel DH77DF
* LSI SAS9220-8i Controller
* Booted via USB

* Intel Celeron G530
* MSI H61I-E35 (B3) Mini-ITX
* Booted via USB

h3. ingenthr




* Intel Core i7
* Gigabyte X79-UD5
* Booted via USB
* Had to update the firmware to the latest to be able to successfully enable Intel VT support.

h3. Licenser

* Intel Xeon E5606
* Intel S5520HCR
* USB Boot via on bord USB (in the case) USB slot


* Super Micro 502L-200B
* Intel Xeon E3-1220V2
* Booted via internal USB and micro usb stick.

h3. Trentster

* Intel Core i5
* Gigabyte Z68-MA-D2H-B3
* Boots via USB & PXE Boot
* Had to disable USB3 in BIOS

* Intel S5520UR
* Intel Xeon CPU E5645
* LSI SAS1064ET
* pxe-boot

* Intel S5520UR
* Intel Xeon CPU E5620
* LSI SAS2008
* pxe-boot

* Intel&nbsp;S3420GP
* Intel Xeon CPU&nbsp;X3450
* pxe-boot

* Gigabyte&nbsp;Z68XP-UD4
* Intel Core&nbsp;i5-2400
* LSI SAS1068E
* USB3 disabled in bios
* pxe-boot





h3. slice01

* Intel Core i7
* Dell Optiplex 990 MT CI7 3.4 8GB/500 HD6350
* LSI 9211-8i 2.0 SAS/SATA PCI-E (IT)
* Boots via USB & PXE Boot

* Dell Inc. PowerEdge R710
* Intel(R) Xeon(R) CPU E5520

* Dell Inc. PowerEdge M610
* Intel(R) Xeon(R) CPU X5690

h3. sebasp

* Intel Q6600&nbsp;
* 8GB Ram
* Gigabyte P35-DS3L
* Boots via CD & USB & PXE Boot (altough USB is slower then CD)
* No KVM as EPT is not available.

* Cisco C200 M2
* 2 x Intel X5640
* 24GB Ram
* 4 x 1T SAS 7.2k drives
* Cisco LSI 1064E Mezzanine

h3. CarlosC

* Dell Inc. PowerEdge R410
* Intel(R) Xeon(R) CPU E5645

* Dell Inc. PowerEdge R610
* Intel(R) Xeon(R) CPU E5645

* Dell Inc. PowerEdge R710
* Intel(R) Xeon(R) CPU E5630

* Dell Inc. PowerEdge R910
* Intel(R) Xeon(R) CPU X7550

* IBM&nbsp;x3550 M3 \-\[7944AC1\]\-
* Intel(R) Xeon(R) CPU X5690

h3. jdef

* Supermicro X8DTL
* Intel(R) Xeon(R) CPU E5645
* kvm, pxeboot

h3. joshie

* Intel DBS1200KPR Mini-ITX Motherboard
* Intel(R) Xeon(R) E3-1245v2
* LSI SAS9220-8i Storage Controller (Flashed with SAS2008 IT Firmware)
* All works as intended

h3. dames

* Supermicro SuperServer 6016T-MTLF
* Super X8DTL-iF motherboard BIOS version 2.1a
* Intel Xeon 5606
* Message: "WARNING: Couldn't read ACPI SRAT table from BIOS. lgrp support will be limited to one group." Thus far, I haven't found a BIOS option to fix this.&nbsp;
* Otherwise works as intended

h3. AlainODea

* Manufacturer: Dell Inc.
* Model: PowerEdge R720xd
* CPU Type: Intel(R) Xeon(R) CPU E5-2640 0 @ 2.50GHz
** Total Cores reported in SmartOS: 24
** VM Capable: true
** CPU Virtualization: vmx
* PERC H710 mini
** 4x 3TB Seagate Constellation ES.2 6Gbps SAS (ST33000650SS)
* Intel(R) Ethernet 10G 2P X520 Adapter
** Latency between SmartOS hosts across Cisco Nexus fabric extension: 75-200us.
* Configured with mirrored vdev zpool: 5481 GiB usable
* Booted via iDRAC Virtual Media using latest.iso DVD image (PXE not attempted yet)
* No known issues.
* Disk Hotplug not attempted yet.

h3. Nahum Shalman (nahamu / nshalman)

* Intel S1200BTLR ATX Server Motherboard
* Intel Xeon E3-1245v2
* 4x Crucial 8GB DDR3 SDRAM Memory Module ECC Unbuffered
* 2x Intel 520 Series 240GB SSD

h3. nefilim

* Supermicro X9SCL-F-O (Intel C202 PCH \-&nbsp;[http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL-F.cfm])
* integrated IPMI 2.0 with dedicated port works
* NIC: onboard Intel 82579LM and 82574L gigabit ports, works, link aggregation too (dont have switch with LACP support to fully test)
* RAM: Kingston 4x4GB ECC unbuffered (DDR3 1333)
* CPU: Intel Celeron G1610 2.6ghz Ivy Bridge (with VTx and EPT support for KVM) ([http://ark.intel.com/products/71072/Intel-Celeron-Processor-G1610-2M-Cache-2_60-GHz])
* Drives: 4 x WD30EFRX (RaidZ1)
* Boots: from internal USB slot
* no known issues, works very well with a few linux KVMs. idles at about 53W.

h3. jrd

* Intel Pentium G645 (A consumer price-point Sandy Bridge that includes both VT-x and EPT)&nbsp;
* Gigabyte H61M-DS2 (USB & PXE boot support). Onboard SATA, Ethernet and VGA works fine.
* Sil3132 PCI-e 1x 2-port SATA Controller card
* Supports KVM.

h3. alcir

* Manufacturer: Fujitsu
* Model: Primergy RX300 S7
* Intel(R) Xeon(R) CPU E5-2620
* All works as intended

h3. cwvhogue

* White Box Server
* 2x Intel Xeon E5-2640 2.5GHz cpus
* 64GB DDR-3-1600 ECC RAM
* 16 x3Tb Hitachi SAS Drives (6Gb/s, 7200RPM)
* 1x120Gb SSD Drive, DVD-RW
* Supermicro X9DR3-F Motherboard with 2x GigE LAN, IPMI
* ARECA ARC 1882-ix16 SAS 6GB/s RAID Controller
* 3U Chassis rackmount with 900W redundant power supply.
* Supported as of SmartOS 20130321

* HP Z210 Workstation (Small Form Factor)
* Intel(R) Xeon(R) E31225
* 16Gb RAM
* On-board Intel 82579LM GigE
* Intel(R) Gigabit CT Desktop Adapter (82574L) PCIe 1x
* 2x 2.0Tb WD Caviar Black HDD
* update to latest BIOS 01.44 (01.41 causes a Grub Error 28: Selected item cannot fit in memory)
* usb boot issues - BIOS requires the usb key partition flag must be marked "bootable" - I do this from CentOS Disk Utility&nbsp;
* all works as intended

* Lenovo Ideacentre Q110 10032
* Intel(R) Atom(TM) 230 1.6GHz
* Updraded to 5120MB RAM
* 64-bit SmartOS all works, but does not support KVM

h3. cwo

* HP ProLiant MicroServer Gen8 (Model 712317-001)
** Intel® Celeron® G1610T (2 core, 2.3 GHz, 2MB, 35W)
** Boots from internal USB port.
** All works as intended